In order to prevent the engine from overheating, the parts around the combustion chamber must be properly cooled. In order to ensure the cooling effect, the automobile cooling system is generally composed of automobile radiator, thermostat, water pump, water inlet and outlet hose, fan, etc. The truck radiator is responsible for the cooling of circulating water. Its water pipes and radiating fins are mostly made of aluminum. The aluminum water pipes are made of flat shape and the radiating fins are corrugated. Pay attention to the heat dissipation performance. The installation direction is perpendicular to the direction of air flow. The wind resistance should be small and the cooling efficiency should be high. The coolant flows in the radiator core, and the air passes outside the radiator core. The hot coolant becomes cold by dissipating heat to the air, and the cold air heats up by absorbing the heat from the coolant, so the radiator is a heat exchanger.
1. The car radiator should not be in contact with any acid, alkali or other corrosive properties.
2. When using antifreeze, in order to avoid corrosion of car radiators, please be sure to use a long-term anti-rust and antifreeze that is produced by a regular manufacturer and meets national standards.
3. In the process of installing the radiator, please do not damage the radiator (sheet) or bump the radiator to ensure the heat dissipation capacity and sealing.
4. The effective environment of the spare radiator should be ventilated and dry.
5. Depending on the actual situation, the user should completely clean the core of the radiator within 1 to 3 months. When cleaning, rinse with clean water along the reverse side of the air inlet.
