Find more U&C product models
Maintenance of the hyundai elantra radiator replacement
Radiator belongs to cooling system. The function of the
hyundai elantra radiator replacement cooling system is to keep the car in an appropriate temperature range under all working conditions. This paper mainly introduces the use and maintenance of the hyundai elantra radiator replacement.
1. Radiators should not be in contact with any acid, alkali or other corrosive properties.
2. It is suggested to use soft water and hard water after softening treatment to avoid blockage and scaling in radiator.
3. Use antifreeze. In order to avoid the corrosion of radiators, it is necessary to use the long-term anti-rust and anti-freeze liquid manufactured by regular manufacturers and in conformity with the national standards.
4. In the process of installing the radiator, do not damage the radiator ribbon (sheet) or touch the radiator, in order to ensure the cooling capacity and sealing.
5. When the
radiator completely drains water and then injects water, the water release switch of the engine block should be turned on first, and then closed when water flows out, so as to avoid blisters.
6. Water level should be checked at any time in daily use, and water should be added after shutdown and cooling. When adding water, the cover of the water tank should be opened slowly, and the operator's body should be as far away as possible from the nozzle, in order to prevent the high-pressure steam from ejecting from the nozzle causing scald.
7. In winter, in order to prevent core ruptures caused by ice, such as long-term parking or indirect parking, water tank cover and water discharge switch should be put out.
8. The effective environment of spare radiators should be kept ventilated and dry.
9. According to the actual situation, the user should clean the core of the radiator completely within 1-3 months. When cleaning, rinse with clean water along the side of the reverse inlet air.
10. The water level gauge should be cleaned every 3 months or, depending on the actual situation, the components should be removed and cleaned with warm water and non-corrosive detergent.